Twincontroller PRO has the same functions as Twincontroller, i.e. it controls the air flow in the growing rooms plus software that will control the humidity during the light cycle. Twincontroller PRO also has a second function which, when activated, will protect against high humidity during the dark cycle as well as the light cycle. The humidity functions can be turned on or off at any time.
Twincontroller PRO monitors the climate while the lights are on - day and night cycle. It has a program that will periodically increase / decrease the fan speed to regulate the humidity.
Twincontroller PRO automatically adjusts the fan speed in over 60 different settings for smooth fan speed control and the most accurate temperature maintenance. This new technology also ensures less fan noise and a longer fan life.
How it works:
By dynamically controlling the rotation speed of the input and exhaust fan, the Twincontroller PRO creates the perfect climate by maintaining the temperature, keeping the airflow under control at all times.
Once the desired temperature level is set, the controller will continuously monitor the temperature in the growing rooms and make the necessary fan speed changes to ensure the desired temperature is always constant.
Twincontroller PRO also has a second function which, when activated, will protect against high humidity during the dark cycle. You can turn the "Moisture function" on or off at any time.
The negative air pressure is ensured by the perfect synchronization of the fans, creating a "vacuum" inside the room. Unlike systems that allow independent control of two fans, the Twincontroller PRO is superior as it gives the user a lot of opportunity to mix with the balance of the air flow.
Tuning is possible using the "Extra" fan speed knob, which increases the speed of the exhaust fan only.
Twincontroller PRO is Plug & Play, so no wiring is required. Just plug in the fans, set the desired temperature and minimum fan speed and the Twincontroller PRO will do the rest.
After installing the controller and connecting the equipment, the Twincontroller PRO takes 5-10 minutes to scan the growing room and evaluate and tune the correct fan speed. After this time, the controller knows the exact fan speed. These measurements are then used to run in order to maintain the temperature. From then on, the controller will automatically adjust the fan speed to always maintain the desired temperature. No need to re-check!
How it works at night:
Z Humidity function Inactive:
During the night cycle, the speeds of both fans will decrease to the minimum fan speed set by the user. The air flow is always maintained under continuous vacuum.
With Humidity Function Active:
When the temperature drops, the speed of both fans will drop to the minimum speed set by the user. Then every hour for up to 10 minutes, the fans will increase and decrease their speed by 5 degrees at the same time. This allows the growing room to "breathe", which only gives enough air exchange to prevent moisture. When the lights are on, the regulator switches back to normal daytime operation.
Switch the humidity function on and off.
To activate the "night" humidity function, remove the cover with the light sensor and place it in direct light. Now that the light switch is off, the humidity function is active. LED lights on the controller will indicate moisture-active operation.
Installation of the Twincontroller PRO driver:
1. Place the fan controller in a convenient location and then place the thermostat in the center of the growth area. Avoid placing the thermostat in direct light or in cold air coming from the ventilation system (incorrect readings).
2. Connect the fans to the Twincontroller PRO
3. Plug the Twincontroller PRO into an electrical outlet
4. Set the desired minimum fan speed **
5. Set the desired temperature
6. Set "Extra" fan speed to the lowest setting.
The Twincontroller PRO controller will now perform a room scan. Patience! It may take 5-10 minutes !! During the scan, the Twincontroller PRO will turn the fan on at 100% of its power for a few seconds and then at its lowest. After 5-10 minutes, the controller will assume the correct speed and will require no more manual adjustment. Twincontroller PRO will automatically adjust the temperature. Here you can set the knob "extra" fan speed if needed to create a vacuum air pressure. In most cases, it will not be necessary to make adjustments.
To turn it off, first disconnect the regulator from the power socket. Then cover the light sensor. After reconnecting the controller, it will work.
** Minimum fan speed:
After setting the minimum fan speed on Twincontroller PRO, set the control range - it can run in between. Do not set the minimum speed right away. For example, if you set the minimum speed to 20%, the controller will automatically adjust the fan speed somewhere between 20-100% in order to maintain a constant temperature. It is recommended to set the minimum fan speed to 20% to give the controller the greatest operating range. Adjustments of the lowest speed can be adapted to the needs of the fan.
Maximum load:
Twincontroller PRO: 7A / 3.5A or 800W per socket.
5-year warranty