GSE 1150W / 5A temperature and speed controller for 1 fan.
It automatically maintains a constant temperature in the growing room.
The fan speed controller adjusts the speed to the measured temperature.
Functions:
- Temperature threshold adjustment.
- Fan rotation / speed control.
Technical data:
- Convenient way to connect the fan, the socket is located on the controller.
- Temperature sensor for measuring the temperature on a 4 m cable
- Voltage: 230V / 50Hz
- Max. load: 1150W / 5A
- Temperature control range: 20 ° C - 30 ° C
- Fan speed range: off, 20% - 100%
- Hysteresis (accuracy): 2 ° C
- Dimensions: 75 x 110 x 90 mm.
- Protection degree: IP20
To find out how the driver works, see the detailed description below.
This controller is a digital, temperature-dependent fan speed controller for both exhaust and air fans.
It works by changing the fan efficiency when the temperature exceeds the designated point by 2 ° C. When the temperature is too high, the controller will accelerate the rotation of the fan blades, when the temperature stabilizes at the desired level, the fan will return to the previously set speed. The sensor included in the set has a 4 m long cable, if it was insufficient, it can be extended up to 50 m, with special attention when removing the old one, installing a new cable and starting up for the first time because incorrect installation may damage the device's components.
Remember not to place the sensor too close to heat or light sources, as this may affect measurement errors and incorrect set parameters.